if you've been around cutting much at all, I'm sure you're accustomed with the dual tank set-up of a typical oxy-fuel torch. This type of equipment is often used to cut thru fairly thick steel. I have used many torches of this type in various applications over the years. For cutting of steel with an oxy-fuel torch can be quite annoying at times. For one, the bottle can be very excessive and requires a lot of work to be moved around. The bottles once empty has to be interchanged and this procedure of bottle exchange can get bothersome and be a strain on your back as well as your wallet. Oxy-fuel torches need readjustment of the flame which further adds to the operation and the time involved in cutting scenarios.
nowadays portable plasma cutting have come into its own so to speak. It's relatively easy to get a high-end plasma cutter at an cheap cost. One cutter that really seems to perform, is the lightweight Hobart AirForce 500i plasma cutter. the Hobart Airforce 500i is capable of running on 115-volts, 120-volts, or run from your lorry engine. This multi-voltage capacity makes the little Hobart plasma cutter strikingly adaptable. With the ability to use the Hobart AirForce 500i on the road via the engine powered set-up, you can do complicated cutting almost in any place!
Hobart is an US located business that has been designing welders for over 80 years. Hoart manufactures the premium quality of welding equipment on the market today. Hobart has proven over the years that they are just concerned in building highest-quality welding set-up. All Hobart plasma cutters must pass a strenous quality control examine which ensures that they are at the top of their business.
There are a bunch of advantages to utilizing plasma cutting rather that oxy-fuel. Plasma cutting is much quicker than oxy-fuel cutting and no preheating of the material is needed as it is needed with oxy-fuel cutting. Also, with a plasma cutter, you have the ability to gouge and penetrate metal. There is less chance of distorting when using Hobart plasma cutters because the Heat Zone is much smaller. Another great advantage is that the cuts themselves are much cleaner and more precise. The plasma cutter opens up the use of added cutting applications such as, cutting out sign stencils.
The Hobart plasma cutter is very lightweight weighing in at only 27.8 lbs. The Hobart AirForce 500i can cut thru 5/8" thick steel! This is astonishing capability for such a light and compact cutter. Hobart plasma cutters make cutting thru steel with ease and effortless. You will save both time and money making cleaner cuts without constantly purchasing fuel bottles.
If you need fast cutting of any conductive metals with speed, exactness, and cleaner cuts you should probably take a look at the Hobart AirForce 500i plasma cutter! There are a lot of plasma cutter on the market to select from, the Hobart is made in the US and they have been in busines for more than 80 years. If I was going to entrustment my most improtant cutting need to one brand it would definately be Hobart. The Hobart plasma cutter offers a much cheaper solution for cutting steel that is faster, better, and cheaper!
If you would more details about the Hobart Airforce 500i, visit our website for an In-Depth review. We have resources available where you can get direct access to the hottest deals from suppliers that deliver fast, and often free shipping! Click Here For More Details!