Today, where going to show you how to fill up your e cigarette cartomizer using a syringe. There is several differnet ways to fill up your e cigarette cartomizer, but some folks say this is the fastest and most effective way to refill it.
You're going to need a few things before you start. E-liquid, an empty e cigarette cartomizer, electronic cigarette battery to do the testing once were done & a syringe. This smokeless cigarette syringe were using has a three milliliter size, an 18 gauge needle which is 1 1/2 in length. Lets grab our E-juice, remove the cap off of the syringe. Make sure the plunger is all the way down prior to drawing the liquid in. Grasp the bottle in your hand, in the other hand get the needle. Inject the syringe needle directly into the nipple of the bottle. Your eighteen gauge your using should fit snuggly in it. At this moment, pull on the plunger of the syringe. Be cautious the eighteen gauge can be drawn rather quickly. However, you may want to do it bit by bit. A half a ML for each electronic cig cartomizer is sufficient. Go ahead & pull up on the plunger. Now, pull straight up & now you have your E-liquid in your syringe.
Now, were going to inject it into the cartomizer. We have two cartomizers here one with the cap on and one with the cap off. The one with a cap off has an intake hole that connects to the other end of the cartomizer. If want to be sure that you stick the needle straight in and inject the fluid into the e cigarette cartomizer. If you do so, what will happen is it will risk leaking out on the other side. This could risk damaging it. Get your e cigarette cartomizer and Instead of diving straight into the e cigarette cartomizer. Tilt your smokeless cigarette cartomizer up, guide your needle of your syringe along the wall and push it in.